Pocket charts are a key part of our classroom, and so is classroom organization. We use our pocket charts for centers and whole-group lessons. Years ago, I wanted something that allowed more kids to use pocket charts, so I made the three-sided pocket chart stand, which later became a four-sided pocket chart stand.
But then, after a year of use, I realized we used the pocket charts A LOT, so we added a fourth side to the stand. Even better.
Classroom Organization: DIY Pocket Chart Stand
PVC Pipe-3/4″ size (Lowes sells pipe in 5-foot sections so I bought those and I needed 12 of those sections)
T Connectors (8)
Elbows (8)
Conduit Hangers (14) (These are found in the electrical aisle!) We bought the 1″ size!
You will also need some extra nuts and bolts to attach the conduit hangers together! We bought 1/4″ screws.
I made my chart 4 feet tall.
The top and bottom crossbars are 36″ long.
Connect the top crossbar to the sides with elbows.
Connect the bottom crossbar to the sides with T connectors.
Finally, the conduit hangers are attached to the 4-foot sides. You will need to attach 2 conduit hangers together. Then, place them on the sides. Tighten the screws to keep the conduit hangers from sliding.
On one section, leave the conduit hangers unattached so you can snap the sections together!
Recently, I added these furniture sliders to make moving the pocket chart stand easy. Now it just slides wherever I need it to go!
BAM!It really was super easy! It took me about 30 minutes to build!
Total cost:$50!!!!
This pocket chart stand is kid-tested; Mr. Greg approved!
It works SO SO well in the classroom, and it’s so versatile and flexible! It makes great room dividers…or a paint booth..and provides so much space for the kids to work!
GET YOUR POCKET CHARTS HERE!
And of course, we have the perfect resource to go with your pocket charts!
